Drawer Slide rail use of common problems summary

Drawer Slide rail use of common problems "summary"

In the furniture, machinery, electronics and other fields,drawer slide as an important accessory, widely used in drawers, doors, machinery and equipment and other components, to facilitate sliding, support the role of load-bearing, etc.. However, in the use of the drawer slide process, often encounter some problems, such as stuck, off, noise, etc..

The emergence of these problems, not only affect the service life and performance of the drawer slide, but also may have a negative impact on the normal operation of the entire equipment or furniture, the following analysis for you:

The cause of the failure of the slide rail and its solution:

1、Shaking

Shaking、not smooth and other problems, is the slide rail in the use of the process of more common problems, and the reasons are the following:

① Drawer and cabinet gap is not adjusted to a suitable position, the slide rail fixed gap is too large, resulting in the process of sliding rail loose;

② Load more than the slide rail nominal, the slide rail may appear abnormal shaking, shaking, etc.;

③ Overweight use for a long time, the steel ball and slide rail with serious wear and tear, produce jitter, the use is no longer smooth, and even the drawer off;

Fully automatic production process, so that each pay slide in the factory before, will be debugged to the best effect, to ensure that the inner and outer three tracks with in a reasonable position. In the field when installing and using:

① Not unpacked before, check the slide rail surface treatment there is no problem, if there is a problem, do not unpack, direct after-sales treatment;

② After unpacking, check the smoothness of the slide rail, open and close whether the normal operation, and then the installation work; (installation process, human factors damage the slide rail, does not belong to the factory products after-sales range.)

2, Jamming

Smooth sliding, silent is a major advantage of the damping slide, so if the slide is not smooth, the first time in the unpacking can be judged slide problems, directly do after-sales treatment. More common problem points are:

① Installation in the slide fell into the wood chips, so that the slide becomes difficult, or even jammed drawers;

② Installation site construction environment, such as wood cutting, ceiling sanding, etc.; so that the installed slides accumulate a lot of dust chips, oil and other impurities. Can be wiped clean with a brush or dry cotton cloth;

③ Slide bump, fall injury, etc. lead to slide deformation, slide uneven also lead to jam not smooth;

3、Rusting

The slide is stored in a humid environment or construction process stained with detergent, paint and other chemical liquids. Not timely rust treatment, it is easy to rust, then you need to remove the rust treatment, serious need to replace the slide rail.

Regularly check the wear and tear of the slide rail, if the anti-rust plating wears off, anti-rust oil can be added regularly to prevent rust;

Brand selection

See here, we all know some common slide rail will appear problems, but I think, no matter how the maintenance, can not resist us to choose a more secure brand to buy at the beginning. The rapid development of domestic hardware, quality and delivery are greatly improved, more and more people began to choose domestic products, believe that made in China.

Jieyang Minzhong Hardware constantly innovation, with the times, international standards, high precision CNC design, stainless steel, the production of hardware products material hardness enough, load weight, loved by the majority of manufacturers and consumers, withstood the test of the market.